Siemens SIMATIC S7-300 Module data Hardware And Installation Manual

Commissioning
S7-300 Programmable Controller Hardware and Installation
A5E00105492-01
8-19
8.6.4 Starting SIMATIC Manager
Introduction
SIMATIC Manager is a GUI for online/offline editing of S7 objects (projects, user
programs, blocks, HW Stations and Tools).
The SIMATIC Manager lets you
• manage projects and libraries,
• call STEP 7 Tools,
• access the PLC (AS) online,
• edit Memory Cards.
Starting SIMATIC Manager
After installation, the Windows desktop displays the SIMATIC Manager icon and in
the Start menu under SIMATIC it displays the program item SIMATIC Manager.
1. Start SIMATIC Manager with double-click on the icon or via Start menu (same
as with all other Windows applications).
User interface
A corresponding editing tool pops up when you open the respective objects.
Double-click on a program block starts the program editor; the block can be edited
(object-oriented start).
Online Help
The Online Help for the active window is always called with the F1 function key.

Siemens SIMATIC S7-300 Module data Specifications

General

Series	S7-300
Manufacturer	Siemens
Protection Class	IP20
System	SIMATIC S7-300
Digital Inputs	Varies by module
Digital Outputs	Varies by module
Analog Inputs	Varies by module
Analog Outputs	Varies by module
Central Processing Unit	Varies by CPU model
Supply Voltage	24V DC or 120/230V AC
CPU Type	Varies (e.g., CPU 312, CPU 315, etc.)
Memory	Varies by CPU model
Communication Interfaces	MPI, PROFIBUS
Programming Languages	LAD, FBD, STL, SCL, GRAPH
Operating Temperature	0°C to 60°C
Storage Temperature	-40°C to 70°C
Relative Humidity	10% to 95% (non-condensing)