Siemens SIMOCODE pro PCS 7

Parameter
A.5 Block parameter MMStat
SIMOCODE pro PCS 7 Library V9.0
264 Programming and Operating Manual, 06/2017, A5E40899442002A/RS-AA/001
Parameter
Data format
Default setting
Meaning
Tmr3Act STRUCT
• Value: REAL
• ST: BYTE
–
• 0.0
• 16#80
Tmr3Act Actual Value in sec
Tmr4Act STRUCT
• Value: REAL
• ST: BYTE
–
• 0.0
• 16#80
Tmr4Act Actual Value in sec
Cnt1Act STRUCT
• Value: DINT
• ST: BYTE
–
• 0.0
• 16#80
Counter1 Actual Value
Cnt2Act STRUCT
• Value: DINT
• ST: BYTE
–
• 0.0
• 16#80
Counter2 Actual Value
Cnt3Act STRUCT
• Value: DINT
• ST: BYTE
–
• 0.0
• 16#80
Counter3 Actual Value
Cnt4Act STRUCT
• Value: DINT
• ST: BYTE
–
• 0.0
• 16#80
Counter4 Actual Value
CalMod1Out STRUCT
• Value: REAL
• ST: BYTE
–
• 0.0
• 16#80
Calculation module 1 – output
CalMod2Out STRUCT
• Value: REAL
• ST: BYTE
–
• 0.0
• 16#80
Calculation module 2 – output
M_OpH STRUCT
• Value:
DWORD
• ST: BYTE
–
• 0.0
• 16#80
Motor operating hours in sec
M_IntOpH STRUCT
• Value:
DWORD
• ST: BYTE
–
• 0.0
• 16#80
Internal Motor operating hours in sec
D_OpH STRUCT
• Value:
DWORD
• ST: BYTE
–
• 0.0
• 16#80
Device operating hours in sec
N_Strt STRUCT
• Value: DINT
• ST: BYTE
–
• 0.0
• 16#80
Number of starts