Siemens SIMOCODE pro PCS 7

Parameter
A.7 Block parameter MMRevDhl
SIMOCODE pro PCS 7 Library V9.0
Programming and Operating Manual, 06/2017, A5E40899442002A/RS-AA/001
279
Parameter
Data format
Default setting
Meaning
OS_Perm STRUCT
• Bit 0: BOOL
• ...
• Bit 31: BOOL
–
• 1
• 1
• 1
Operator permissions
OpSt_In DWORD 16#00000000 Enabled operator stations
Feature STRUCT
• Bit 0: BOOL
• ...
• Bit 31: BOOL
–
• 0
• 0
• 0
Status of various features
Feature2 STRUCT
• Bit 0: BOOL
• ...
• Bit 31: BOOL
–
• 0
• 0
• 0
Status of various features
FaultExt STRUCT
• Value: BOOL
• ST: BYTE
• 0
• 16#80
External error
ReserveIn
WORD
16#00
Reserved
Output parameters
Table A- 23 Output parameter MMRevDhl
Parameter
Data format
Default setting
Meaning
CurrMon
DINT
0
Current monitoring time [s]
MS_Release STRUCT
• Value: BOOL
• ST: BYTE
–
• 0
• 16#80
1: MS release
MonDynErr STRUCT
• Value: BOOL
• ST: BYTE
–
• 0
• 16#80
Feedback Error on change in control output
MonStaErr STRUCT
• Value: BOOL
• ST: BYTE
–
• 0
• 16#80
Feedback Error on unexpected feedback change
MonDynStopErr STRUCT
• Value: BOOL
• ST: BYTE
–
• 0
• 16#80
1 = Feedback stop error due to control change