Siemens SIMOTICS M-1PH8 - Page 122

Permissible radial forces for SH 160






)
5
>N1@
Q>USP@
[
>PP@





[
)
5

Figure4-26 SH 160, Standard, and Standard with locating bearing, 20,000 h bearing lifetime
R
5DGLDOIRUFHFKDUW,QWRWDO
5DGLDOIRUFH)1
'LVWDQFH[PP
Figure4-27 SH 160, increased radial force, 16,000 h bearing lifetime, minimum radial force: 1kN
Note
Bearing with increased radial force
The roller bearings used here could sustain damage if they are operated under no load.
Observe the speci󹪝ed minimum radial forces!
Mechanical properties
4.7Radial and axial forces
1PH8 SIMOTICS M main motors
120 Con󹪝guration Manual, 12/2022, A5E51895839A