Introduction
1
1.1 About SIMOTICS
Description
SIMOTICS is the Siemens family of electric motors addressing the complete motor spectrum in
Digital Industry.
1.2 About this manual
1.2.1 Content
Description
This Conguration Manual supports you when selecting motors for your application. The
Conguration Manual refers to rules and guidelines for conguring motors.
To illustrate possible application areas for our products, typical use cases are listed in this product
documentation and in the online help. These are purely exemplary and do not constitute a
statement on the suitability of the respective product for applications in specic individual cases.
Unless explicitly contractually agreed, Siemens assumes no liability for such suitability.
Suitability for a particular application in specic individual cases must be assessed by the user,
taking into account all technical, legal, and other requirements on a case-by-case basis. Always
observe the descriptions of the technical properties and the relevant constraints of the
respective product contained in the product documentation.
This documentation should be kept in a location where it can be easily accessed and made
available to the personnel responsible.
Information regarding third-party products
Note
Recommendation relating to third-party products
This document contains recommendations relating to third-party products. Siemens accepts the
fundamental suitability of these third-party products.
You can use equivalent products from other manufacturers.
Siemens does not accept any warranty for the properties of third-party products.
1PH8 SIMOTICS M main motors
Conguration Manual, 12/2022, A5E51895839A 7
To Next Page
Loading...
Need help?
General