Siemens SIMOTICS M-1PH8 - Perform a test run with the water-cooled motor

4.3 Construction types
For correct motor selection, the following types of construction according to EN60034-7 (IEC
60034‑7) apply:
IM B3
IM B6
IM B7
IM B8
IM V6
IM V5
IM V35
1)
IM V15
1)
IM B35
1)
IM B5, IM B 14
IM V3, IM V19
IM V1, IM V18
Types of construction/Mounting positions
Types of construction/Mounting positions
1) Fixing on the 󹪞ange and feet is necessary.
Figure4-8 Types of construction
You will 󹪝nd the available types of construction in Chapter "Selection and ordering data."
Mechanical properties
4.3Construction types
1PH8 SIMOTICS M main motors
Con󹪝guration Manual, 12/2022, A5E51895839A 85