Siemens SIMOTICS M-1PH8 - Configuration; Configuring Software; TST Engineering Tool (TIA-Selection-Tool)

Con󹪝guration
6
6.1 Con󹪝guring software
6.1.1 TST engineering tool (TIA-Selection-Tool)
Overview
The TIA-Selection-Tool (TST) engineering tool supports you when dimensioning the hardware
and 󹪝rmware components required for a drive application.
TST supports the following con󹪝guration steps:
• Con󹪝guring the power supply
• Designing the motor and gearbox, including calculation of mechanical transmission
elements
• Con󹪝guring the drive components
• Compiling the required accessories
• Selection of the line-side and motor-side power options
The con󹪝guration process produces the following results:
• A parts list of components required (Export to Excel)
• Technical speci󹪝cations of the system
• Characteristic curves
• Comments on system reactions
• Design information of the drive and control components
• Energy considerations of the con󹪝gured drive systems
You can 󹪝nd additional information that you can download in the Internet at TST (
https://
support.industry.siemens.com/cs/ww/en/view/109767888).
1PH8 SIMOTICS M main motors
Con󹪝guration Manual, 12/2022, A5E51895839A 203