Siemens SIMOTICS M-1PH8 - Page 132

Permissible axial forces for SH 132
>USP@
>USP@
>USP@
>USP@
>USP@
>USP@
>USP@
)
5
>1@










)
$
>1@


Figure4-46 SH 132, Standard, and Standard with locating bearing, 20,000 h bearing lifetime
Table 4-26 SH 132, increased radial force, 20,000 h bearing lifetime
Motor type Max. permissible axial force as a function of speed
1PH813 Speed n
r/min
1500 2000 3000 4000 5000 6500 -
Axial force F
A
N
2600 2550 2400 2250 2200 2100 -
Note
The permissible axial force is absorbed exclusively by the deep-groove ball bearing of the duplex
bearing. The cylindrical roller bearing absorbs the radial force. The axial force F
AZ
that is
permissible during operation is calculated as stated in table "Calculating the permissible axial
force (Page113)."
Mechanical properties
4.7Radial and axial forces
1PH8 SIMOTICS M main motors
130 Con󹪝guration Manual, 12/2022, A5E51895839A