Commissioning
4.4 Establishing an online connection to the drive
Commissioning with Startdrive
Commissioning Manual, (IH3), 07/2016, 6SL3097-4AA10-0BP0
101
Adding an IP address in the subnet
1. Click in the toolbar on button .
The "Select devices for setting up the online connection" dialog box opens.
Figure 4-39 Selecting a device for online connection
2. Select the device and click "Connect" to confirm.
3. Assign an IP address to the PG/PC within the subnet of the drive unit.
If you have not already done so, it is now possible to temporarily assign a suitable IP
address from the subnet of the device via Windows Control Panel.
Figure 4-40 Assigning an IP address
To Next Page
Loading...
