Siemens SINAMICS S120 - Basic Parameterization of the Drive Objects; Control Unit; Web Server

Commissioning
4.6 Basic parameterization of the drive objects
Commissioning with Startdrive
Commissioning Manual, (IH3), 07/2016, 6SL3097-4AA10-0BP0
109
4.6
Basic parameterization of the drive objects
4.6.1
Control Unit
4.6.1.1
Web server
The web server provides information on a SINAMICS device via its web pages. Access is via
an Internet browser. The information on the web pages is shown in German or English. For
information about message texts, drive object states and parameter names, there is a
language selection which allows the display to be switched over to the required language
(German, English, Chinese, Italian, French, Spanish).
You configure the web server using a screen form.
Calling the screen form
1. In the project navigation, select menu "Drive control > Parameter".
The corresponding detailed view is displayed at the right.
2. In the secondary navigation, call menu "Basic parameterization > Web server".
The detailed view is updated. The settings become active for the web server.
Figure 4-45 Web server configuration