Siemens SINAMICS S120 - Creating a Project; Creating a New Project or Opening a Project

Commissioning
4.3 Creating a project
Commissioning with Startdrive
Commissioning Manual, (IH3), 07/2016, 6SL3097-4AA10-0BP0
55
4.3
Creating a project
4.3.1
Creating a new project or opening a project
For projects, the choice is yours:
● You create a completely new project (see "Create new project").
● You open an existing project, and subsequently change the project configuration (see
"Open existing project").
Precondition
You have opened the Startdrive in the TIA Portal (Page 53)application.
Creating a new project
You can create new projects once the Startdrive application has been opened in the TIA
Portal.
1. Click on "Create new project" in the secondary navigation in the Portal view of Startdrive.
The entry fields for the basic project data are displayed to the right in the detailed view.
Figure 4-1 Entering project data
2. Enter the project data here:
Project name
Startdrive automatically counts each new project.
Path The simpler the archive path for the project, the faster the project can be
loaded.
Author
The login code for the person entering the data is preassigned.
Comment
You can save brief project information here.
3. Click on "Create" to save basic project data.