Startdrive commissioning tool
2.4 User interface - trace function
Commissioning with Startdrive
42 Commissioning Manual, (IH3), 07/2016, 6SL3097-4AA10-0BP0
The curve diagram displays the selected signals of a recording. Binary signals are shown in
the lower diagram as bit track. You can adapt the display of the signals in the signal table
and with the toolbar of the curve diagram.
Setting options and displays in the curve diagram
The following diagram shows the display in Startdrive as example:
Figure 2-10 Overview of ChartView
The Y scale in the diagram applies to the selected (highlighted in gray) signal in the legend.
The legend can be moved with the mouse.
Trace function calls (Page 199)
To Next Page
Loading...
