Siemens SINAMICS S120 - Interconnect BICO Inputs

Fundamentals
3.4 BICO interconnections
Commissioning with Startdrive
50 Commissioning Manual, (IH3), 07/2016, 6SL3097-4AA10-0BP0
3.4.2
Interconnect BICO inputs
Use a connection dialog to connect binector or connector inputs.
Connecting a signal
To make a connection, proceed as follows:
1. Click the binector or connector symbol of the signal that you want to connect.
A connection dialog for the selection of the possible parameters opens. The drive object
for which you want to make a connection is displayed automatically in the "Drive object"
drop-down list on the right.
Figure 3-2 BICO interconnection dialog