Siemens SINAMICS S120 - Important Parameters

Commissioning
4.6 Basic parameterization of the drive objects
Commissioning with Startdrive
Commissioning Manual, (IH3), 07/2016, 6SL3097-4AA10-0BP0
121
4.6.3.4
Important parameters
Description
You define the basic properties of the drive control using the important parameters.
Figure 4-53 Important parameters
Parameters
Designation
Description
p1121 Ramp-down time Ramp-down time which the drive requires to decelerate from max-
imum speed (p1082) to standstill.
p1135 OFF3 ramp-down
time
The OFF3 ramp-down time sets the ramp-down time from maxi-
mum speed down to standstill for the OFF3 command.