Commissioning
4.2 Commissioning workflow
Commissioning with Startdrive
54 Commissioning Manual, (IH3), 07/2016, 6SL3097-4AA10-0BP0
The following steps are required when commissioning a drive:
1. Create a project with Startdrive.
2. Establish an online connection between Startdrive and the target device.
3. Commission the drive at the control panel
4. Carry out a basic parameterization of the drive device
5. Optional: Load the project to the target device.
6. Result: the motor turns.
To Next Page
Loading...
