Siemens SINAMICS S120 - Shortcut Menus and Icons in Startdrive; Function Calls Project View; Project Navigation

Appendix
A.3 Shortcut menus and icons in Startdrive
Commissioning with Startdrive
198 Commissioning Manual, (IH3), 07/2016, 6SL3097-4AA10-0BP0
A.3
Shortcut menus and icons in Startdrive
A.3.1
Function calls project view
A.3.1.1
Project navigation
Shortcut menu
The shortcut menu of a drive in the project navigator contains the following entries:
Menu item
Icon (button) in the
toolbar
Description
Open
-
Opens the drive device view.
Parameters - Opens the parameter view in the working area.
Cut Cuts the selected content and copies it to the clipboard.
Copy
Copies the content to the clipboard.
Paste Inserts the clipboard content into the project navigation.
Delete - Deletes the selected content from the project naviga-
tion.
Rename
-
Permits a designation to be changed.
Go to topology
view
- Opens the topology view for drives that are networked
via PROFINET.
Go to network
view
- Opens the network view.
Download to
device
Loads the data from the project into the drive (only
when online).
Upload from
device (software)
Loads the data from the device into the project (only
when online).
Compile
-
Compiles existing programs.
Go online Establishes an online connection to the drive.
Go offline
Disconnects the online connection - the drive goes
offline.
Online & diag-
nostics
- Opens the Online & diagnostics editor; if the drive is not
online, Startdrive tries to establish an online connection.
Browsing a pro-
ject
Opens a search screen form You can browse for indi-
vidual information about the active project using this
screen form.
Properties - Opens the Properties dialog box of the drive. There, for
example you set bus parameters.