Siemens SINAMICS S120 - Safety Instructions for Commissioning

Fundamentals
3.2 Safety instructions for commissioning
Commissioning with Startdrive
46 Commissioning Manual, (IH3), 07/2016, 6SL3097-4AA10-0BP0
3.2
Safety instructions for commissioning
WARNING
Danger to life if the fundamental safety instructions and residual risks are not carefully
observed
The non-observance of the fundamental safety instructions and residual risks stated in
Chapter 1 can result in accidents with severe injuries or death.
• Adhere to the fundamental safety instructions.
• When assessing the risk, take into account residual risks.
WARNING
Danger to life as a result of motor movement during motor data identification
Motor data identification causes movements of the drive, which can result in death, serious
injury, or damage to property.
• Ensure that nobody is in the danger zone and that the mechanical parts can move
freely.
• Respond to possible malfunctions by applying suitable measures (e.g. EMERGENCY
STOP or EMERGENCY OFF).
WARNING
Risk of death if the safety instructions and residual risks are not carefully observed
If the safety instructions and residual risks are not observed in the associated hardware
documentation, accidents involving severe injuries or death can occur.
• Observe the safety instructions provided in the hardware documentation.
• When assessing the risk, take into account residual risks.
Note
Please observe the installation guid
elines and safety instructions in the SINAMICS S120
Equipment Manuals.