Siemens SINAMICS S120 - Page 65

Commissioning
4.3 Creating a project
Commissioning with Startdrive
Commissioning Manual, (IH3), 07/2016, 6SL3097-4AA10-0BP0
65
Inserting an infeed unit
You insert an infeed unit via the hardware catalog
1. Open "Line Modules" in the hardware catalog.
Active Line Modules, Basic Line Modules and Smart Line Modules can be selected.
2. Select the unspecified infeed unit in the hardware catalog.
Figure 4-8 Selecting an infeed unit
3. Drag the unspecified infeed unit into the device view.
Figure 4-9 Infeed unit inserted
Generally, the DRIVE-CLiQ connection is automatically established. The unspecified
infeed unit must now be specified in more detail.