Commissioning
4.3 Creating a project
Commissioning with Startdrive
Commissioning Manual, (IH3), 07/2016, 6SL3097-4AA10-0BP0
77
6. In the secondary navigation of the inspector window, select "Motor data selection..."
7. Based on the article number, select a motor with the appropriate motor encoder from the
list.
Figure 4-22 Motor specified
The data of the selected motor are assigned to the unspecified motor. The white area
turns dark gray.
Further, a Sensor Module Cabinet (SMC) - encoder evaluation and an encoder are
inserted.
The motor is inserted and specified.
To Next Page
Loading...
