Commissioning
4.4 Establishing an online connection to the drive
Commissioning with Startdrive
Commissioning Manual, (IH3), 07/2016, 6SL3097-4AA10-0BP0
97
An online connection to the drive exists, and you have made a search for the drives under
Online access in the appropriate interface with "Update accessible devices".
The device is displayed.
To assign an IP address, proceed as follows:
1. Double-click "Online & Diagnostics" under "Online access" in the project navigator.
2. Double-click the "Functions" entry in the secondary navigation of the working area.
3. Double-click the "Assign IP address" entry.
Figure 4-35 Assigning an IP address
4. Enter an IP address that matches your project.
5. Enter an appropriate subnet mask.
6. Click on "Assign IP address"
7. Update the display at "Online access". The IP address is now displayed.
The MAC address is read out automatically.
The IP address has been assigned to the drive.
To Next Page
Loading...
