2.8.4 Creating a project
Description
You create a new project in the following. Within a project, all of the automation tasks required,
for example the hardware configuration and the PLC programming, are performed.
Precondition
● The TIA Portal has been started.
Procedure
1. Click "Create new project" in the portal view.
Figure 2-5 New project
2. Assign a project name and select the storage location of the project (path).
3. Click "Create".
Result
A new, empty project has been created.
Fundamentals
2.8 Device configuration
Safety Integrated (with SINAMICS S120)
36 Commissioning Manual, 02/2020, A5E46305916B AB
To Next Page
Loading...
