3.11 Safety-relevant communication
Introduction
Here, you can obtain an overview of the possibilities of safety-related communication in
SIMATIC Safety F-systems.
Options for safety-related communication
Safety-related communication On subnet Additional hardware
required
Safety-related CPU-CPU communication:
IO controller-IO controller communica‐
tion
PROFINET IO PN/PN coupler
IO controller-I-device communication PROFINET IO —
IO controller-I-slave communication PROFINET IO IE/PB link
IO-controller-IO-controller communica‐
tion for
S7
Distributed Safety
PROFINET IO PN/PN coupler
Safety program of the F-PLC
3.11 Safety-relevant communication
Safety Integrated (with SINAMICS S120)
Commissioning Manual, 02/2020, A5E46305916B AB 83
To Next Page
Loading...
Need help?
General
