Siemens SINUMERIK Series User Manual

4. If the machine has a gearbox for the spindle, set the gear stage (e.g. auto).
5. Select a spindle direction of rotation (clockwise or counterclockwise) in
the "Spindle M function" field.
6. Press the <CYCLE START> key.
The spindle rotates.
7. Select the "Stop" setting in the "Spindle M function" field.
Press the <CYCLE START> key.
The spindle stops.
Note
Changing the spindle speed
If you enter the speed in the "Spindle" field while the spindle is rotating, the new speed is
applied.
5.2.4 Position spindle
Procedure
1. Select the "JOG" operating mode.
2. Press the "T, S, M" softkey.
3. Select the "Stop Pos." setting in the "Spindle M function" field.
The "Stop Pos." entry field appears.
4. Enter the desired spindle stop position.
The spindle position is specified in degrees.
5. Press the <CYCLE START> key.
The spindle is moved to the desired position.
Execution in manual mode
5.2 Selecting a tool and spindle
Milling
Operating Manual, 08/2018, 6FC5398-7CP41-0BA0 167

Siemens SINUMERIK Series Specifications

General

Axes Control	Up to 31 axes
Category	Control Unit
Manufacturer	Siemens
Series	SINUMERIK
Control Type	CNC
Communication Interfaces	Ethernet, USB
Operating Temperature	0°C to 45°C
Protection Class	IP20
Power Supply	24V DC
Display	Color TFT LCD