Siemens SINUMERIK Series

5.9 Default settings for manual mode
Specify the configurations for the manual mode in the "Settings for manual operation" window.
Default settings
Settings Meaning
Type of feedrate Here, you select the type of feedrate.
● G94: Axis feedrate/linear feedrate
● G95: Revolutional feedrate
Setup feedrate G94 Enter the desired feedrate in mm/min.
Setup feedrate G95 Enter the desired feedrate in mm/rev.
Variable increment For variable increments, enter the desired increment when traversing axes.
Spindle speed Here, enter the desired spindle speed in rpm.
Procedure
1. Select the "Machine" operating area.
2. Press the <JOG> key.
3. Press the menu forward key and the "Settings" softkey.
The "Settings for manual operation" window is opened.
Execution in manual mode
5.9 Default settings for manual mode
Milling
188 Operating Manual, 08/2018, 6FC5398-7CP41-0BA0