Examples
VAR_A
VAR_A+2*VAR_B
SIN(VAR_C)
9.16.6 Compatibility for cycle support
The cycle support is generally upwards compatible. This means that cycle calls in NC programs
can always be recompiled with a higher software version, changed and then run again.
When transferring NC programs to a machine with a lower software version, it cannot be
guaranteed, however, that the program will be able to be changed by recompiling cycle calls.
Creating a ShopMill program
9.16 Calling technology functions
Milling
352 Operating Manual, 08/2018, 6FC5398-7CP41-0BA0
To Next Page
Loading...
