Siemens SINUMERIK Series User Manual

Operator control Function
Undo
Multiple changes are undone one by one.
As soon as a change has been completed in an input field, this function is no
longer available.
Restoring
Multiple changes are restored one by one.
As soon as a change has been completed in an input field, this function is no
longer available.
Virtual keyboard
Activates the virtual keyboard.
Calculator
Displays a calculator.
Online help
Opens the online help.
Camera
Generates a screenshot.
3.4.3 Further operator touch controls
Operator control Function
Advances to the next horizontal softkey bar.
When page 2 of the menu is called, the arrow appears on the right.
Advances to the higher-level menu.
Advances to the next vertical softkey bar.
Tapping the Cancel alarm symbol clears all queued cancel alarms.
If a channel menu has been configured, it is displayed.
Tapping the channel display in the status display switches you to the next
channel.
Multitouch operation with SINUMERIK Operate
3.4 Multitouch user interface
Milling
Operating Manual, 08/2018, 6FC5398-7CP41-0BA0 75

Siemens SINUMERIK Series Specifications

General

Axes Control	Up to 31 axes
Category	Control Unit
Manufacturer	Siemens
Series	SINUMERIK
Control Type	CNC
Communication Interfaces	Ethernet, USB
Operating Temperature	0°C to 45°C
Protection Class	IP20
Power Supply	24V DC
Display	Color TFT LCD