16.3 Measuring the workpiece zero
You can use the following workpiece elements to determine the workpiece zero:
● Edge
● Corner
● Pocket/hole
● Spigot
● Plane
You can measure the workpiece zero either manually or automatically (see Section "Measuring
the workpiece zero (Page 113)").
Procedure
1. "Manual Machine" is active.
2. Press the "Workpiece zero" softkey.
3. Select the the required measuring variant in the vertical softkey bar and
press the appropriate softkey.
Working with Manual Machine
16.3 Measuring the workpiece zero
Milling
834 Operating Manual, 08/2018, 6FC5398-7CP41-0BA0
To Next Page
Loading...
