Easy Extend
21
21.1 Overview
Easy Extend enables machines to be retrofitted with additional devices, which are controlled
by the PLC or that require additional NC axes (such as bar loaders, swiveling tables or milling
heads), at a later point in time. These additional devices are easily commissioned, activated,
deactivated or tested with Easy Extend.
Communication
The communication between the operator component and the PLC is performed via a PLC
user program. The sequences to be executed for the installation, activation, deactivation and
testing of a device are stored in a statement script.
Available devices and device states are displayed in a list. The view of the available devices
can be controlled for users according to their access rights.
The subsequent chapters are selected for example only and are not available in every
statement list.
Machine manufacturer
Please observe the information provided by the machine manufacturer.
Up to 64 devices can be managed.
References
SINUMERIK 828D Commissioning Manual
Milling
Operating Manual, 08/2018, 6FC5398-7CP41-0BA0 891
To Next Page
Loading...
Need help?
General
