Siemens SINUMERIK Series User Manual

Stopping machining
Press the <CYCLE STOP> key.
Machining stops immediately, individual blocks do not finish execution.
At the next start, execution is resumed at the same location where it
stopped.
Canceling machining
Press the <RESET> key.
Execution of the program is interrupted. On the next start, machining will
start from the beginning.
Machine manufacturer
Please observe the information provided by the machine manufacturer.
Machining the workpiece
6.1 Starting and stopping machining
Milling
190 Operating Manual, 08/2018, 6FC5398-7CP41-0BA0

Siemens SINUMERIK Series Specifications

General

Axes Control	Up to 31 axes
Category	Control Unit
Manufacturer	Siemens
Series	SINUMERIK
Control Type	CNC
Communication Interfaces	Ethernet, USB
Operating Temperature	0°C to 45°C
Protection Class	IP20
Power Supply	24V DC
Display	Color TFT LCD