Siemens SINUMERIK Series User Manual

There are no gaps in the numbering within the range.
Machine manufacturer
Please observe the information provided by the machine manufacturer.
Procedure
1. Select the "Parameter" operating area.
2. Press the "User variable" softkey.
3. Press the "R variables" softkey.
The "R parameters" window appears.
Display comments
1. Press the ">>" and "Display comments" softkeys.
The "R parameters with comments " window opens.
2. Press the "Display comments" softkey once again to return to the "R pa‐
rameters" window.
Delete R variables
1. Press the ">>" and "Delete" softkeys.
The "Delete R parameters" window appears.
2. In fields "from R parameters" and "to R parameters", select the R param‐
eters whose values you wish to delete.
- OR -
Press the "Delete all" softkey.
3. Activate the checkbox "also delete comments" if the associated com‐
ments should also be automatically deleted.
4. Press the "OK" softkey.
● A value of 0 is assigned to the selected R parameters or to all R
parameters.
● The selected comments are also deleted.
Machining the workpiece
6.12 Display and edit user variables
Milling
242 Operating Manual, 08/2018, 6FC5398-7CP41-0BA0

Siemens SINUMERIK Series Specifications

General

Axes Control	Up to 31 axes
Category	Control Unit
Manufacturer	Siemens
Series	SINUMERIK
Control Type	CNC
Communication Interfaces	Ethernet, USB
Operating Temperature	0°C to 45°C
Protection Class	IP20
Power Supply	24V DC
Display	Color TFT LCD