You have the option of archiving any files in the FTP server by creating new directories and
subdirectories.
Note
Selecting a program / execution
It is not possible to select a program directly on the FTP drive, and change to execution in the
"Machine" operating area.
Precondition
User name and password have been set up in the FTP server.
Procedure
1. Select the "Program manager" operating area.
2. Press the "FTP" softkey.
When selecting the FTP drive for the first time, a login window is displayed.
3. Enter the user name and password and press the "OK" softkey to log into
the FTP server.
The content of the FTP server with its folders is displayed.
4. Press the "Log out" softkey after the required data processing has been
completed.
The connection to the FTP server is disconnected. In order to reselect
the FTP drive, you must log on again.
Managing programs
14.1 Overview
Milling
Operating Manual, 08/2018, 6FC5398-7CP41-0BA0 753
To Next Page
Loading...
Need help?
General
