Siemens SINUMERIK Series User Manual

3. Press the "Glob. settings" softkey.
4. Enter the user name and the associated password for the configured
drives to be released.
5. Press the "OK" softkey.
The specifications are transferred as default setting for the Windows re‐
lease.
If you press the "Cancel" softkey, then all of the data that has not been
activated is rejected.
Managing programs
14.12 Set up drives
Milling
782 Operating Manual, 08/2018, 6FC5398-7CP41-0BA0

Siemens SINUMERIK Series Specifications

General

Axes Control	Up to 31 axes
Category	Control Unit
Manufacturer	Siemens
Series	SINUMERIK
Control Type	CNC
Communication Interfaces	Ethernet, USB
Operating Temperature	0°C to 45°C
Protection Class	IP20
Power Supply	24V DC
Display	Color TFT LCD