EasyManua.ls Logo

Siemens SIPROTEC 5 Series

Siemens SIPROTEC 5 Series
254 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Ethernet Modules
Application: Ethernet-based communication to the substation automation technology via substation-
control protocols (for example, IEC 61850 and DNP3)
Secure communication to DIGSI 5
Communication between the devices (IEC 61850-GOOSE)
Synchrophasor protocol
The modules can be operated with or without an integrated switch.
Long-distance modules
Application: Direct protection interface communication over long distances using multimode or single-
mode optical fibers.
The designation of the modules corresponds to the following scheme, which is typically explained with the
module USART-AB-1EL. The module designation consists of 3 blocks.
1st block Type of module
USART = Serial module for short or long distance
ETH = Ethernet module
2nd block Unique code for the module in the product code of the device
The code consists of 2 letters.
3rd block Number and physical design of the connections
1 = 1 connection (1 channel)
2 = 2 connections (2 channels)
EL = Electrical connection
FO = Fiber-optic connection
LDFO = Long-distance transmission via optical fibers
Communication Applications of the Plug-In Modules
You can find information on communication applications for the plug-in modules in the following tables.
Table 4-1
Communication Applications of the Plug-In Modules
Plug-In Module
Module Type: USART-AB-1EL
Module Type: USART-AC-2EL
Module Type: USART-AD-1FO
Module Type: USART-AE-2FO
Module Type: ETH-BA-2EL
Module Type: ETH-BB-2FO
Module Type: USART-AF-1LDFO
Module Type: USART-AW-2LDFO
Module Type: USART-AG-1LDFO
Module Type: USART-AU-2LDFO
Module Type: USART-AK-1LDFO
Module Type: USART-AV-2LDFO
Module Type: USART-AH-1LDFO
Module Type: USART-AJ-1LDFO
Module Type: USART-AX-2LDFO
Module Type: USART-AY-2LDFO
Physical Connection
1 x electrical serial RS485, RJ45
2 x electrical serial RS485, RJ45
1 x optical serial, 820 nm, ST connector,
2 km via 62.5/125 μm multimode optical
fiber
4.2.2
Plug-In Modules
4.2 Communication Modules
132 SIPROTEC 5, Hardware Description, Manual
C53000-G5040-C002-C, Edition 10.2017

Table of Contents

Related product manuals