Siemens SIPROTEC 5 Series User Manual

Hardware Characteristics of Non-Modular Devices (7xx82)
A non-modular device always consists of just 1 module (1/3 of 19 inches) and cannot be expanded with
expansion modules (1/6 of 19 inches). These hardware characteristics are:
•
Module size: 1/3 of 19 in.
•
Type of construction: Flush-mounting devices with on-site operation panel fitted directly on the device
The on-site operation panels can be selected from 2 variants:
•
With a large display, keypad, and 16 two-colored LEDs
•
With a small display, keypad, and 16 two-colored LEDs
The module always contains the power-supply module PS101 and an input and output module IO10X. The
input and output module IO10X includes the terminals for current and voltage transformers. Optionally, the
module can be equipped an additional input and output module IO110 for extra binary inputs and outputs.
The plug-in modules are available for various applications. You can find more information on the available
plug-in module types in chapter 4 Plug-In Modules.
Introduction
1.2 Modular Systems and Hardware Characteristics
18 SIPROTEC 5, Hardware Description, Manual
C53000-G5040-C002-C, Edition 10.2017

Siemens SIPROTEC 5 Series Specifications

General

Protection Functions	Overcurrent, differential, distance, over/under voltage, frequency
Communication Protocols	IEC 61850, IEC 60870-5-103, Modbus, DNP3, PROFINET
Display	Graphical LCD with touch functionality
Inputs/Outputs	Digital and analog inputs/outputs, configurable
Power Supply	24-250V DC or 100-240V AC
Mounting	Panel or rack mounting
Environmental Conditions	Operating temperature: -25°C to +70°C, humidity up to 95% non-condensing
Product Type	Multifunctional protection relay
Application	Power generation, transmission, distribution, industrial plants
Cybersecurity	IEC 62351, role-based access control, secure communication
Modular Design	Yes, with plug-in modules for flexibility
Hardware	Robust design with high processing power
Software	SIPROTEC 5 DIGSI software for configuration and operation
Control Functions	Remote control, switching sequences, interlocking
Monitoring Functions	Event recording, disturbance recording, measurement values
HMI	Integrated HMI with graphical display and pushbuttons. Remote HMI via web browser or dedicated software. User-configurable dashboards and single-line diagrams.
Time Synchronization	IRIG-B, SNTP, PTP (IEEE 1588)
Certifications	IEC, IEEE, UL, CE