Siemens SIPROTEC 5 Series User Manual

(1) Push the holder, push the sealing cap to the back and remove it
(2) Unlock the eject lever
(3) Remove the SDHC memory card
²
Unpack the new SDHC memory card.
Do not touch the contacts of the SDHC memory card with your fingers.
²
Insert the new SDHC memory card.
When inserting, make sure that the SDHC memory card is properly aligned: The side with the contacts
must be facing up, the side with the sticker facing down.
[dw_insert_SDHC, 1, --_--]
Figure 5-21 Inserting the SDHC Memory Card into the Device
!
CAUTION
Exercise caution when removing the SDHC memory card from a defective device.
If you want to remove the SDHC memory card from a defective device and to insert the card into another
healthy device and if the data must be kept, note the following:
Noncompliance with the specified measures can result in loss of data.
²
To avoid a reformatting of the SDHC memory card, you must first import the parameters of the defec-
tive device to another device.
²
You can insert the SDHC memory card in the other device and use it only then.
²
The recordings on the SDHC memory card from the defective device can still be read in the other
device.
²
Insert the sealing cap back again.
²
Resume operation of the device.
Working on the Device
5.6 SDHC Memory Card
182 SIPROTEC 5, Hardware Description, Manual
C53000-G5040-C002-C, Edition 10.2017

Siemens SIPROTEC 5 Series Specifications

General

Protection Functions	Overcurrent, differential, distance, over/under voltage, frequency
Communication Protocols	IEC 61850, IEC 60870-5-103, Modbus, DNP3, PROFINET
Display	Graphical LCD with touch functionality
Inputs/Outputs	Digital and analog inputs/outputs, configurable
Power Supply	24-250V DC or 100-240V AC
Mounting	Panel or rack mounting
Environmental Conditions	Operating temperature: -25°C to +70°C, humidity up to 95% non-condensing
Product Type	Multifunctional protection relay
Application	Power generation, transmission, distribution, industrial plants
Cybersecurity	IEC 62351, role-based access control, secure communication
Modular Design	Yes, with plug-in modules for flexibility
Hardware	Robust design with high processing power
Software	SIPROTEC 5 DIGSI software for configuration and operation
Control Functions	Remote control, switching sequences, interlocking
Monitoring Functions	Event recording, disturbance recording, measurement values
HMI	Integrated HMI with graphical display and pushbuttons. Remote HMI via web browser or dedicated software. User-configurable dashboards and single-line diagrams.
Time Synchronization	IRIG-B, SNTP, PTP (IEEE 1588)
Certifications	IEC, IEEE, UL, CE