Siemens SIPROTEC 7SD80 User Manual

Functions
2.12 Circuit-Breaker Test
SIPROTEC, 7SD80, Manual
E50417-G1140-C474-A1, Release date 09.2011
160
2.12.4 Information List
No. Information Type of In-
formation
Comments
- CB1tst ABC - CB1-TEST trip/close Phases ABC
7328 CB1-TESTtripABC OUT CB1-TEST TRIP command ABC
7329 CB1-TEST close OUT CB1-TEST CLOSE command
7345 CB-TEST running OUT CB-TEST is in progress
7346 CB-TSTstop FLT. OUT_Ev CB-TEST canceled due to Power Sys. Fault
7347 CB-TSTstop OPEN OUT_Ev CB-TEST canceled due to CB already OPEN
7348 CB-TSTstop NOTr OUT_Ev CB-TEST canceled due to CB was NOT READY
7349 CB-TSTstop CLOS OUT_Ev CB-TEST canceled due to CB stayed CLOSED
7350 CB-TST .OK. OUT_Ev CB-TEST was successful

Siemens SIPROTEC 7SD80 Specifications

General

Brand	Siemens
Model	SIPROTEC 7SD80
Category	Protection Device
Language	English