Siemens SIPROTEC 7SD80 User Manual

Functions
2.1 General
SIPROTEC, 7SD80, Manual
E50417-G1140-C474-A1, Release date 09.2011
36
184 Error Board 2 OUT Error Board 2
185 Error Board 3 OUT Error Board 3
186 Error Board 4 OUT Error Board 4
187 Error Board 5 OUT Error Board 5
190 Error Board 0 OUT Error Board 0
191 Error Offset OUT Error: Offset
193 Alarm adjustm. OUT Alarm: Analog input adjustment invalid
194 Error neutralCT OUT Error: Neutral CT different from MLFB
320 Warn Mem. Data OUT Warn: Limit of Memory Data exceeded
321 Warn Mem. Para. OUT Warn: Limit of Memory Parameter exceeded
322 Warn Mem. Oper. OUT Warn: Limit of Memory Operation exceeded
323 Warn Mem. New OUT Warn: Limit of Memory New exceeded
2054 Emer. mode OUT Emergency mode
32200 PDITestFOon/OFF IntSP PDI Test Mode FO ON/OFF
32201 PDITestCuon/OFF IntSP PDI Test Mode Cu ON/OFF
32202 PDI Test Mode OUT PDI Test Mode
32203 PDI Test remote OUT PDI Test Mode remote
32224 PDI FO: AGING OUT PDI FO: aging (distance damping high)
32225 PDI Cu: AGING OUT PDI Cu: aging (distance damping high)
No. Information Type of In-
formation
Comments

Siemens SIPROTEC 7SD80 Specifications

General

Brand	Siemens
Model	SIPROTEC 7SD80
Category	Protection Device
Language	English