4-6 Configure Output Configure the output to control the valves
7 Process Value Select the process value
8-15 Configure recipe Configure the recipe (valve control and fault handling)
16 Active Recipe Select a dosing recipe
*: Set Operation Mode to Status Mode and set Status Mode to control Primary Valve or
Secondary Valve.
**: Set Status Mode to Primary Valve or Secondary Valve.
***: Set Operation Mode to Dosing Control.
For dosing setup, see Dosing (Page 145).
6.4 Remote commissioning with PDM
For commissioning with SIMATIC PDM, see separate function manuals for FCT030 Modbus,
HART or PROFIBUS.
See also
Remote operation (Page 123)
SIMATIC PDM (www.siemens.com/simatic-pdm)
Commissioning
6.4 Remote commissioning with PDM
SITRANS FC330
102 Operating Instructions, 01/2019, A5E44030648-AB
To Next Page
Loading...
