Siemens SITRANS FC330 - Measurement views

2
3
4
1
① Long TAG Describes the measurement point and is shown in all operation views.
Can be changed via the menu "Long tag" (3.1.1).
② View number Shows the operation view number. The number refers to the view num‐
ber configured in the menu "Setup" → "Local display" (2.8).
③ Alarm status text Describes the alarm. Only shown if an alarm is active.
④ Alarm icon Indicates an active alarm. Shows the alarm class, see Device status
symbols (Page 167).
Only shown if an alarm is active.
7.1.4 Measurement views
Single value
1
)&66
① Process value The user-defined process value to be displayed is configured in menu 2
"Setup" → 2.8 "Local display" → 2.8.5 ... 2.8.10 "View" (1-6).
Operating
7.1 Local operation (HMI)
SITRANS FC330
Operating Instructions, 01/2019, A5E44030648-AB 111