Siemens SITRANS FC330 - Volume Flow: Sensor Dimension Dependent Default Settings (Process Values)

Sensor dimension Default value
normal m³/s
Range
Hysteresis
DN 15 0 0 to +8.84
DN 25 0 0 to +24.5
DN 50 0 0 to +98.2
DN 80 0 0 to +251
DN 100
DN 150
Low flow cut-off
DN 15 0.000010278 0 to +8.84
DN 25 0.000031944 0 to +24.5
DN 50 0.000144444 0 to +98.2
DN 80 0.000377778 0 to +251
DN 100 0.000783333
DN 150 0.001269444
Sensor dimension m³/s m
3
/h
Low flow cut-off
DN 15 1.23333E-05 0.0444
DN 25 0.00005617 0.2022
DN 50 0.000140444 0.5056
DN 80 0.000368611 1.327
DN 100 0.000783333 2.82
DN 150 0.001269444 4.57
A.2.3 Volume flow: Sensor dimension dependent default settings (Process values)
Volume flow
Sensor dimension Default value
kg/s
Range
Lower warning limit
DN 15 -0.005 -0.005 to +0.005
DN 25 -0.015 -0.015 to +0.015
DN 50 -0.059 -0.059 to +0.059
DN 80 -0.249 -0.249 to +0.249
DN 100
DN 150
Lower alarm limit
Technical reference
A.2 Sensor dimension dependent default settings
SITRANS FC330
Operating Instructions, 01/2019, A5E44030648-AB 229