Description
3
3.1 Overview
SITRANS Coriolis flowmeter systems consist of a transmitter and a sensor. The following table
lists the available combinations of transmitters and sensors.
Transmitter Sensor type
FCT030 FCS300
DN 15 to DN 150 (0.5" to 6")
You can use the flowmeter for the following measuring tasks:
● Mass flow
● Volume flow
● Standard volume flow
● Density
● Medium temperature
● depending on product variants: fraction, including industry-specific fractions
Operate the device according to the specifications in section Technical data (Page 195).
① Communication modem
② PC with SIMATIC PDM or similar application
③ SIMATIC PLC system with HART interface
The Coriolis flowmeter can be used in a number of system configurations:
● as a field mounted transmitter supplied with various optional inputs and outputs
● as part of a system environment, for example SIMATIC S7
SITRANS FC330
Operating Instructions, 01/2019, A5E44030648-AB 21
To Next Page
Loading...
