Siemens SITRANS FC330 - Menu item 2.4: Inputs and outputs

Level 3 Level 4 Level 5
No. Name No. Name No. Name
2.3.3.10 Alarm and warning limits 2.3.3.10.1 Upper alarm limit
2.3.3.10.2 Upper warning limit
2.3.3.10.3 Lower warning limit
2.3.3.10.4 Lower alarm limit
2.3.3.10.5 Hysteresis
2.3.4 Reset All Totalizers
C.5 Menu item 2.4: Inputs and outputs
Table C-5 Current output on CH1
Level 3 Level 4 Level 5
No. Name No. Name No. Name
2.4.1 CH1 - output with HART 2.4.1.1 Loop current mode
2.4.1.2 Active operation
2.4.1.3 PV selection
2.4.1.4 Direction
2.4.1.5 Loop current scale
2.4.1.6 Upper range value
2.4.1.7 Lower range value
2.4.1.8 Fail safe activation condition
2.4.1.9 Damping value
2.4.1.10 Fail-safe Behaviour
2.4.1.11 Fail Safe Value
2.4.1.12 Fail-safe minimum duration
Note
Menu item visibility
The availability in the HMI of the menu items for channels 2, 3 and 4 depend on the I/O
configuration.
HMI menu structure
C.5 Menu item 2.4: Inputs and outputs
SITRANS FC330
244 Operating Instructions, 01/2019, A5E44030648-AB