11.10 Certificates and approvals
Specification Ex marking
ATEX/IECEx
Ex marking
FM/CSA
Flameproof and Intrinsic Safety
FCT030 transmitter
(can be installed in Zone 1 for gas and
Zone 21 for dust)
II 2(1) GD
Ex db eb ia [ia Ga] IIC T6 Gb
Ta = -40°C to +60°C
II 2(1) GD
Ex tb [ia Da] IIIC T85°C Db
Class I, II, III Division 1 Gp A, B, C, D, E,
F, G
Class I Zone 1: AEx db eb ia [ia Ga] IIC
T6 Gb
Zone 21: AEx tb [ia Da] IIIC T85°C Db
Ta = -40°C to +60°C
Flameproof, lncreased Safety and lntrinsically Safe
FC330 compact system
(can be installed in Zone 1 for gas)
II 1/2 (1) G
Ex db eb ia [ia Ga] IIC/IIB T* Ga/Gb
Ta = -40°C to +60°C
* Temperature class (dependent on the
process temperature and the ambient
temperature, see Use in hazardous
areas (Page 17))
Class I Division 1 Gp A, B, C, D
Class I, Zone 1 AEx db eb ia [ia Ga] IIC/
IIB Gb
Ta = -40°C to +60°C
Hygienic version EHEDG
(in preparation)
Pressure equipment
● 2014/68/EU Pressure Equipment Directive (PED)
● Canadian Registration Number (CRN)
(in preparation)
11.11 SensorFlash
Table 11-28 SensorFlash
Description Specification
SD card
Capacity 4 GB
File system support FAT32 / 8.3
Temperature range
Operation:
Storage:
-40 to +85 °C (-40 to 185 °F)
-40 to +100 °C (-40 to 212 °F)
Note
SensorFlash functions support
Only the supplied 4 GB SD cards are supported for backup, restore, logging, and firmware
update.
Technical data
11.11 SensorFlash
SITRANS FC330
206 Operating Instructions, 01/2019, A5E44030648-AB
To Next Page
Loading...
Need help?
General
