Siemens SITRANS FC330 - Pressure - Temperature Ratings (Nickel Alloy Sensors)

Table 11-33 DIN 11851 [bar]
PN (bar) / DN Temperature TS (°C)
-10 0 50 100 140
25 / 50-100 25 25 25 25 25
40 / 10-40 40 40 40 40 40
Table 11-34 DIN 32676 & ISO 2852 [bar]
PN (bar) / DN Temperature TS (°C)
-10 0 50 100 140
10 / 85-219.1 10 10 10 10 10
16 / 48.3-76.2 16 16 16 16 16
25 / 6.35-42.4 25 25 25 25 25
Note
Test pressure
Maximum allowable test pressure (MATP) for the flowmeter and process connection is 1.5
times the nominal pressure up to 150 bar (2176 psi).
11.13.2 Pressure - temperature ratings (nickel alloy sensors)
Figure 11-7 Nickel alloy: Metric flange ratings, EN 1092-1 (P: Process pressure; T: Process
temperature)
Technical data
11.13 Pressure - temperature ratings
SITRANS FC330
214 Operating Instructions, 01/2019, A5E44030648-AB