Introduction
1
This document is delivered as standard in electronic media with the device. The latest version
can be downloaded at www.siemens.com (www.siemens.com).
1.1 Purpose of this documentation
These instructions contain all information required to commission and use the device. Read the
instructions carefully prior to installation and commissioning. In order to use the device
correctly, first review its principle of operation.
The instructions are aimed at persons mechanically installing the device, connecting it
electronically, configuring the parameters and commissioning it, as well as service and
maintenance engineers.
See also
Certificates (Page 275)
Technical support (Page 275)
QR code label (Page 275)
1.2 Document history
The following table shows major changes in the documentation compared to the previous
edition.
The most important changes in the documentation when compared with the respective
previous edition are given in the following table.
Edition Note
01/2019 Second edition
● Chapter Technical data (Page 195) updated
● Chapter Diagnostics and troubleshooting (Page 167) updated
● Appendix HMI menu structure (Page 237) updated
● Overall revision of chapters and contents
06/2018 First edition
SITRANS FC330
Operating Instructions, 01/2019, A5E44030648-AB 9
To Next Page
Loading...
