Siemens SITRANS FC330 - Connecting Channels 2 to 4

5. Connect wires to terminals using wiring tool.
– Field mount transmitter:




PROFIBUS DP/PA
④ In + (B)
⑤ In - (A)
⑥ Out + (B)
⑦ Out - (A)
Functional Earth
– Wall mount transmitter:








PROFIBUS DP/PA
④ In + (B)
⑤ In - (A)
⑥ Out + (B)
⑦ Out - (A)
6. Tighten cable gland.
5.2.2.6 Connecting channels 2 to 4
Channel 2 is for output only and channels 3 to 4 can be connected as either inputs/outputs or
relays, see Input/output configuration (Page 74).
Connecting
5.2 Connecting FC330
SITRANS FC330
72 Operating Instructions, 01/2019, A5E44030648-AB