Siemens SITRANS FC330 - Menu item 3.3: Maintenance; Menu item 3.4: Diagnostics

C.11 Menu item 3.3: Maintenance
Table C-19 Maintenance
Level 3 Level 4 Level 5
No. Name No. Name No. Name
3.3.1 Copy configuration
3.3.2 Spare part replacement 3.3.2.1 Transmitter 3.3.2.1.1 Replace transmitter
3.3.2.1.2 Replace transmitter cas‐
sette
3.3.2.1.3 Replace sensor cassette
3.3.2.2 Sensor 3.3.7.2.1 Replace DSL
3.3.7.2.2 Replace sensor
3.3.3 Operating time 3.3.3.1 Operating time
3.3.3.2 Operating time total
Note
Spare part replacement
Menu item 3.3.2 Spare Part Replacement is only visible if access level is Expert.
C.12 Menu item 3.4: Diagnostics
Table C-20 Diagnostics
Level 3 Level 4 Level 5
No. Name No. Name No. Name
3.4.1 Sensor 3.4.1.1 Driver current
3.4.1.2 Pickup S1 amplitude
3.4.1.3 Pickup S2 amplitude
3.4.1.4 Max. Pickup Amplitude diff
3.4.1.5 Derived frequency
3.4.1.7 Offset
3.4.2 Temperature monitoring 3.4.2.1 Medium temperature 3.4.2.1.1 Current value
3.4.2.2 Transmitter electronics tem‐
perature
3.4.2.2.1 Current value
3.4.2.2.2 Minimum
3.4.2.2.3 Timestamp at minimum
3.4.2.2.4 Maximum
3.4.2.2.5 Timestamp at maximum
3.4.2.3 DSL temperature 3.4.2.3.1 Current value
3.4.2.4 Sensor frame temperature 3.4.2.4.1 Current value
HMI menu structure
C.12 Menu item 3.4: Diagnostics
SITRANS FC330
Operating Instructions, 01/2019, A5E44030648-AB 261