Siemens SITRANS FC330 - Menu item 3.7: SensorFlash

Level 3 Level 4 Level 5
No. Name No. Name No. Name
3.6.6 Sensor 3.6.6.1 Hazardous area approval
3.6.6.2 Maximum mass flow capaci‐
ty
3.6.6.3 Calibration factor
3.6.6.4 Density calibration offset
3.6.6.5 Density calibration factor
3.6.6.6 Density compensation tube
temperature
3.6.6.7 Density compensation sen‐
sor frame temperature
3.6.6.8 Material of wetted parts
3.6.7 Fraction order code
Note
Menu item 3.6.7 "Fraction order code" is only visible if fraction has been ordered.
C.15 Menu item 3.7: SensorFlash
Table C-23 SensorFlash
Level 3 Level 4 Level 5
No. Name No. Name No. Name
3.7.1 Eject
3.7.2 SensorFlash installed
3.7.3 Capacity
3.7.4 Free space
3.7.5 Data logging 3.7.5.1 Activation
3.7.5.2 Data logging mode
3.7.5.3 Logging interval
3.7.5.4 Process values 3.7.5.4.1 Logging value 1
3.7.5.4.2 Logging value 2
3.7.5.4.3 Logging value 3
3.7.5.4.4 Logging value 4
3.7.5.4.5 Logging value 5
3.7.5.4.6 Logging value 6
3.7.5.4.7 Logging value 7
3.7.5.4.8 Logging value 8
3.7.5.4.9 Logging value 9
3.7.5.5 Advanced logging 3.7.5.5.1 Register 1
HMI menu structure
C.15 Menu item 3.7: SensorFlash
SITRANS FC330
264 Operating Instructions, 01/2019, A5E44030648-AB