● Up to 4 input/output channels optionally available:
Channel 1 can be parameterized as:
– PROFIBUS DP 9.6 kbit/s to 12 Mbit/s or
– PROFIBUS PA profile 4.0 or
– Current HART output (4-20 mA) (HART 7.5) or
– Modbus RTU RS-485
Channel 2 Signal output can be parameterized as:
– Current output (0/4-20 mA)
– Pulse output
– Frequency output
– Status output
Channel 3 and 4 Signal output can be parameterized as:
– Current output (0/4-20 mA)
– Pulse output
– Frequency output
– Status output
– Pulse or frequency redundancy mode (channel 2 together with channel 3)
Channels 3 and 4 Relay output can be parameterized as:
– Status output
Channels 3 and 4 Signal input can be parameterized as:
– Totalizer control
– Dosing control
– Zero point adjustment
– Freezing of process values
– Forcing of outputs
● Current, frequency, and pulse outputs with configurable fail-safe mode
* The SD card mass storage function is not available for use in the USA. This option is not
available for ordering or shall not be ordered if end user may be located within USA.
3.6 Applications
The main applications of the Coriolis flowmeter can be found in all industries, such as:
● Chemical & Pharma: detergents, bulk chemicals, acids, alkalis, pharmaceuticals, blood
products, vaccines, insulin production
● Food & Beverage: dairy products, beer, wine, soft drinks, °Brix/°Plato, fruit juices and pulps,
bottling, CO
2
dosing, CIP/SIP-liquids, mixture recipe control
Description
3.6 Applications
SITRANS FC330
Operating Instructions, 01/2019, A5E44030648-AB 35
To Next Page
Loading...
