Configure Configure the process values (unit, low flow cut-off, limits, and hysteresis)
Totalizer Configure totalizers (if activated in operating view, it is possible to reset
totalizer without password access)
6.3.5.4 Inputs and outputs wizard (menu item 1.4)
The Inputs and outputs wizard will guide you through setup of inputs and outputs on channels
1 to 4. The availability of channels 2 to 4 depends on the product configuration.
&XUUHQWRXWSXW
6HOHFWFKDQQHO
6LJQDORXWSXW
6LJQDORXWSXW
6LJQDOLQSXW
1H[W
5HOD\RXWSXW
6LJQDOLQSXW
7KH,QSXWVDQGRXWSXWVZL]DUGLVQRZILQLVKHG
5HOD\RXWSXW
6LJQDORXWSXW
View text Options/Description
Select channel Select the channel to be configured
Channels 3 and 4 can only be assigned to one function (signal output, relay output or signal
input).
*: See appropriate graphic for configuration of the input/output function.
Current output wizard
Current output - channel 1
The Current output on Channel 1 is a 4 to 20 mA output with Profibus, HART, Modbus. Channel
1 can be used in Functional Safety applications if ordered with SIL option.
Commissioning
6.3 Local commissioning via HMI
SITRANS FC330
94 Operating Instructions, 01/2019, A5E44030648-AB
To Next Page
Loading...
Need help?
General
